ON-PREMISES Drying Tumblers
ST-050 - 50 lb (23 kg) Tumbler
ST-075 - 75 lb (34 kg) Tumbler
MicroMaster System
Today’s on-premise laundry rooms need laundry equipment that
is flexible, reliable, and delivers excellent cleanability every time.
The MicroMasterTM Laundry System from Speed Queen does just that. Speed
Queen has developed a system of washer-extractors and tumblers that
work in harmony with each other to fulfill these basic needs and exceed
expectations The MicroMaster TM Laundry System is designed flexibility
with versatile programming for a wide range of laundering options.
Together, the washer-extractors and tumblers have over 30 factory
preset or customized cycles to choose from. Once programmed, your
laundry results are the same no matter who does the laundry or when
Linens last longer when they receive the right care. Micro-Master
washer TM cleanability extractors combine cycle flexibility with
programmable water temperatures for excellent fabric care and more
efficient usage of chemical supplies. At Speed Queen we're confident
that our washer-extractors and tumblers are built reliability better to
last longer.
Fast Dry Performance
By balancing and controlling the key variables of energy
input, airflow, and cabinet design, Speed Queen is able to offer
state-of-the-art drying performance. This results in minimum drying
times, maximum labor utilization, and maximum linen life.
| Large, Easy-to-Clean Lint Compartment Maintaining maximum airflow promotes drying efficiency and is essential for a successful on-premises laundry. Speed Queen's fine mesh lint screen cleans itself automatically by depositing lint into a large storage area (single tumbler pictured) for easy removal. Eliminates the need to manually clean filter after each use. The stack's unique lint drawers, for each cylinder, offers maximum lint capacity in a mini-mum amount of space. |
 |
| Concentrated Airflow Our axial airflow pattern and sealed cylinder rims ensure that every bit of warm air enters the cylinder and passes through the fabrics. Therefore, the load receives the most concentrated drying possible and no energy is wasted. |
 |
| Simplicity and Compatibility Fewer moving parts mean fewer maintenance problems and less wear. Because each component is designed to perform a singular task, none is overworked. The result is less wear individually and increased reliability overall. And, to keep things simple, we've designed our single and stack tumblers to be compatible for easy installation and repair. In fact, even our control box, which swings out for easy maintenance and accessibility, can be interchanged between different models. |
 |
Superior Fit and Finish
We've designed our stack and single tumblers for efficient
use of space and maximum customer potential. At 42.875" (1089 mm), our
stack tumblers have the shallowest install size in the industry; the
single’s narrow 28" (711 mm) width allows the installation of more
tumblers in a given space. Speed Queen's tumblers not only fit well
together — they look good too. Our innovative paint system electro
statically applies paint for superior bonding and corrosion resistance.
The paint is baked on the equipment inside and out to provide a tough
and durable finish.
| Microprocessor Control You determine drying time. MicroMaster tumblers feature an automatic drying cycle, or time dry. As automatic cycle reaches the appropriate dryness level, the tumbler begins the cool down process. Both automatic and time dry cycles have factory-set dryness levels; other settings can be created. Save frequently used settings as custom cycles. Fabric type can also be a cycle selection. Pre-set temperatures for various fabrics simplify drying. Indicator lights inform user of cycle status. The Special Cycle specifies the number and temperature of heating cycles and allows user to select cycle frequency from heat-on to heat-off. |
 |
Manually Operated Timers |
|
Technical Specification |
ST-050 | ST-075 | ||
Capacity |
50 lb |
75 lb |
||
Cylinder Size - in (mm) (diameter x depth) |
37” x 30” (939 x 762) |
37” x 36” (939 x 914) |
||
Dry Weight Capacity - lb (kg) |
50 (23) |
75 (34) |
||
Dimensions - in (mm) (height x width x depth) |
Gas and Electric Models 76 5/8" x 38 5/8" x 47” (1946 x 981 x 1194) Steam Models 80" x 38 5/8" x 47” |
Gas and Electric Models 76 5/8" x 38 5/8" x 53” (1946 x 981 x 1346) Steam Models 80" x 38 5/8" x 53” |
||
(2032 x 981 x 1194) |
(2032 x 981 x 1346) |
|||
Motor HP |
Non- Reversing 1/2 HP Reversing 1/3-1/3 HP |
Non- Reversing 3/4 HP Reversing 1/3-1/3 HP |
||
Energy Data |
Gas Models |
Gas Models |
||
120,000 Btu/hour (30,240 kcal/hr) Steam Models At 100 psig (6.9 bar): 5.1 BHP, |
165,000 Btu/hour (41,580 kcal/hr) Steam Models At 100 psig (6.9 bar): 6.1 BHP, |
|||
|
177,500 Btu/hr (52 kW) At 15 psig (1.0 bar): 3.4 BHP, 118,800 Btu/hr (34.8 kW) |
210,346 Btu/hr (61.6 kW) At 15 psig (1.0 bar): 4.1 BHP, 140,810 Btu/hr (41.2 kW) |
||
Electrical Specifications and Circuit Requirements |
Gas and Steam Models |
Gas and Steam Models |
||
Amps Non-Rev Rev |
Amps Non-Rev Rev |
|||
120/60/1 9.3 200–208/240/60/1 5.1/5.1 200–208/240/60/3 2.8/2.8 200/50/3 3.3 460-480/60/3 1.4 230-240/50/1 6.3 230-240/50/3 3.1 380/400-415/50/3 1.6 Electric Models – 30 kW Non-Rev 200-208/60/3 89 240/60/3 79 200/50/3 84 230/50/3 73 480/60/3 38 240/50/3 79 380/50/3 47 400-415/50/3 43 Electric Models 21 kW |
N/A N/A 4 4.2 1.9 6.9 4.3 2.0 Rev 88 78 85 75 38 78 48 44 |
120/60/1 13.8 200–208/240/60/1 7.6/7.6 200–208/240/60/3 3.8/3.8 200/50/3 3.5 460-480/60/3 1.9 230-240/50/1 6.7 380/400-415/50/3 3.5 380/400–415/50/3 1.8 Electric Models – 30 kW Non-Rev 200-208/60/3 89 240/60/3 79 200/50/3 84 230/50/3 73 480/60/3 38 240/50/3 79 380/50/3 47 41 5/50/3 45 |
N/A N/A 4.3 4.5 2.1 7.0 4.9 2.1 Rev 88 77 85 75 38 78 48 45 |
|
– Non-Rev 240/50/1 93 |
Rev 95 |
|
||
0/60/3 4 amp 4 amp Airflow, CFM - cfm (liters/sec) |
750 (354) – 208–240/60/3 750 cfm (354 liters/sec.) |
4 amp |
6 amp 60 Hz Gas and Steam Models |
|
|
920 (434) |
|||
All Electric and 50 Hz Gas and Steam Models |
||||
750 (354) |
||||
Water Inlet Size (C.A.R.E. System) |
(1) 3/4" Hose Connection |
(1) 3/4" Hose Connection |
||
Net Weight - lb (kg) |
545 (247) |
615 (279) |
||
Shipping Weight* - lb (kg) |
Domestic Export 602 (273) 650 (295) |
Domestic Export 677 (307) 750 (340) |
||
Agency Approvals |
Gas Models |
Gas Models |
||
|
CSA Star, CSA us, CE |
CSA Star, CSA us, CE |
||
|
Electric and Steam Models |
Electric and Steam Models |
||
|
CSA us, CE |
CSA us, CE |
||
Ask for Further Discount GAS HEATED |
50#Single |
75#Single |
MT - Manual Dual Timer |
Sugg. List | $3,466 |
$3,857 |
OM - Solid State OPL Microprocessor Control |
Sugg. List | $3,584 |
$3,975 |
RT -Manual Dual Timer -Reversing Cylinder |
Sugg. List | $4,308 |
$4,699 |
RM - Solid State OPL Microprocessor Control -Reversing Cylinder |
Sugg. List | $4,426 |
$4,817 |
MT -Manual Dual Timer |
Sugg. List | $4,326 |
$4,827 |
OM - Solid State OPL Microprocessor Control |
Sugg. List | $4,444 |
$4,945 |
RT -Manual Dual Timer -Reversing Cylinder |
Sugg. List | $5,168 |
$5,669 |
RM - Solid State OPL Microprocessor Control -Reversing Cylinder |
Sugg. List | $5,286 |
$5,787 |
MT -Manual Dual Timer |
Sugg. List | $3,752 |
$4,445 |
RM - Solid State OPL Microprocessor Control -Reversing Cylinder |
Sugg. List | $3,870 |
$4,563 |
RT -Manual Dual Timer -Reversing Cylinder |
Sugg. List | $4,594 |
$5,287 |
RM - Solid State OPL Microprocessor Control -Reversing Cylinder |
Sugg. List | $4,712 |
$5,405 |
All (MT/OM) Models |
50# Single |
75# Single |
|
STEAM & GAS: 460-480/60/3, 200-208/240/60/3, 200/50/3 230-240/50/3, 380/400-415/50/3 |
Sugg. List | $206 |
$206 |
50# Models (MT Non-CE Only) |
Sugg. List | ($134) |
N/A |
50# / 75# (MT/OM) Models |
Sugg. List | $206 |
$206 |
120# /170# Models |
Sugg. List | N/A |
N/A |
CARE TM (Combustion Auto Response Equipped) |
Sugg. List | $402 |
$402 |
STAINLESS STEEL FRONT (all Panels) |
Sugg. List | $287 |
$287 |
STAINLESS STEEL CYLINDER 430 Bright Annealed SS - 050, 075. EUROPEAN UNION (CE MARKED) APPROVALS |
Sugg. List | $333
|
$423
|
FILLER-PANELS TO MATCH EXISTING INSTALL |
Sugg. List | N/A |
N/A |
BOLT ON ANGLES FOR 34-1/4 " OPENINGS |
Sugg. List | $68 |
N/A |
SLAT CRATING |
Sugg. List | $169 |
$169 |
ADDITIONAL OPTIONS: PLEASE CONSULT FACTORY - Gas Heated - Natural or LP Gas |
PRICES: EX-WORKS ( RIPON, WI) All 60 Hertz gas models are AGA/CGA (CSA gas) approved All 50 Hertz gas models are AGA approved All 60 Hertz electric and steam models are CSA approved |
UNITS PER CONTAINER |
||
20' Container |
8 |
8 |
40 'Container (High Cube for 170# Single) |
18 |
16 |
